Surface Mount Speaker with InformaCast Page 22
v
1.8.1-20190215
Local voice detection hangtime
–
Specifies how long voice must be
absent at the microphone before deciding that the person who was
speaking has stopped. This prevents audio from being cut off during
brief pauses in speech. Default level is
200ms
.
Local echo reject duration
–
After the remote user has stopped
speaking, the microphone is not allowed to detect voice until this
much time has elapsed. This prevents speaker audio from echoing
back through the microphone to the remote user. The default level is
250ms
.
Remote voice detection threshold
–
Sets the threshold for
detecting voice activity from the remote user. The most sensitive
setting is
0
, and the least sensitive setting is
50
. Default level is
22
.
Remote voice detection hangtime
–
Specifies how long remote
voice must be absent before deciding that the person who was
speaking has stopped. This prevents audio from being cut off during
brief pauses in speech. Default level is
40ms
.
Remote voice priority threshold
–
Sets the threshold for allowing
the remote user’s voice to override any activity at the microphone.
Remote speech above this threshold will be played out the speaker
at normal volume regardless of whether the local user is talking. The
most sensitive setting is
0
, and the least sensitive setting is
50
.
Default level is
27
.
Speaker audio delay
–
Amount of delay to be applied to the speaker
audio, which gives the voice detection algorithm time to unmute the
speaker when remote speech begins. Too small of a value can
truncate the beginning of audio, while too large of a value can
disrupt the flow of a conversation. Default level is
120ms
.