Wahsega Labs WL-SPKR-SMT-INF, Руководство пользователя

Страница: 19 / 32

Surface Mount Speaker with InformaCast Page 18 v 1.8.1-20190215
Room 1 SIP

Use SIP Server – If checked, operates in normal SIP mode. If
unchecked, operates in peer-to-peer mode.

Display name – The name to report to the SIP server, which may
be shown to other callers (depending on the SIP server’s config).

Username/Number – The phone number or extension this
speaker is configured with on the SIP server.

Domain – The hostname or domain name of the SIP server. Not
used in peer-to-peer (P2P) mode.

Password – Password used to register this account with the SIP
server, if needed. By default, authentication is done with the
Username/Number above. If a different username should be used
for authentication, enter it in Authentication Username under the
Advanced tab above.
Room 1 RTP Priority 2

Multicast IP address – The multicast IP address this device should
listen on to receive RTP audio. Valid addresses range from
224.0.0.1
to
239.255.255.255
.

Note: Some addresses, particularly in the
224.xx.xx.xx
range, are globally reserved and should not be used!
Consider using addresses in the
239.255.xx.xx
range, which
are “Administratively Scoped Local Addresses.”

Port – The UDP port this account should listen on to receive RTP
audio. Valid ports range from
1
to
65535
. Setting this to
0
will use
the default RTP port of
5004
.