Surface Mount Speaker with InformaCast Page 17
v
1.8.1-20190215
Room 1 InformaCast
Audio Mixing
–
Maximum number of InformaCast audio
broadcasts to play simultaneously on this channel.
Note 1
To disable audio mixing, choose
1
.
Manual config server URL
–
Enter the URL of the InformaCast
server if needed.
Within a typical installation, the configuration server will be
detected automatically. However, there may be times when
that detection fails and this must be done manually. There
are two methods, HTTP or TFTP.
HTTP
–
The format of the URL must match
“
http://<ip_address>:<port number>/<path_on_server>
”.
It is easiest to grab this information from the SPL
configuration found under
Admin | Network Parameters
| SLP Parameters
on the InformaCast server.
TFTP
–
If a TFTP server is in use, the format of the URL
must be
“
tftp://<ip_address>:<port_number>/<path_on_server>
”.
Note 1:
While each channel is capable of playing up to three (3) audio
broadcasts at once, the maximum number of simultaneous
high-quality
(44.1 kHz)
audio broadcasts is two (2) per device.