Surface Mount Speaker with InformaCast Page 12
v
1.8.1-20190215
9.
To change the SIP account settings, go to the
Accounts
page and modify
settings in the account. Most users will only need to set
Username
/
Number
(the phone number or extension assigned to this
speaker) and
Domain
(the hostname or IP address of your SIP server).
You may also provide an
Account
Name
, which is used only for logging
purposes, and a
Display
Name
, which may be used by your SIP server
depending on its configuration.
If a password is required for your SIP server or proxy server, provide it
in the
Password
field. If your SIP server or proxy server requires an
authentication username that is different from the name entered in
Username
/
Number
, enter it under the
Advanced
tab in the
Auth
Username
field.
10.
After configuring the network and SIP settings for your speaker, use
the configuration settings described in the next sections to customize
the speaker, intercom, panic button and InformaCast functionality.
11.
Be sure to set up your speaker(s) and relays (if applicable) in the
InformaCast programming utility. For setup assistance, visit
https://www.singlewire.com/academy
.
