Wahlberg Winch 25, Руководство пользователя

Страница: 19 / 44

220.805.011 19 Date: 2021-12-09
Lifting wire power
(Only model 221)
Warning! Read “Safety Information” on pag e 2 before connecting AC mains power
to the lifting wire.
Warning! Socket outlets or external power switches used to supply the lifting wire
attachment with power must be located near the winch and easily accessible so
that the lifting wire attachment can easily be disconnected from power.
Warning! Check that the voltage range specified for the lifting wire matches the
attached power voltage before applying power to the lifting wire. Do not apply
power to the lifting wire at any other voltage than that specified in this manual.
Lifting cable connection plug
The Winch 25 double requires a power input through a Neutrik speakON NL4FX cable
connector. The cable for connecting the speakON plug on the winch for the lifting wire
power, must meet the requirements
listed under “Protection from electric shock” on
page 2.
The winches two lifting wires are used as conductors for power up to 48 V.
Connecting the power wire
Refer to the section “AC power” on pa ge 14 for installation of the power connection.
To install a Neutrik speakON NL4FX cable connector, follow the original Neutrik
instructions in Appendix 4.