WAHLAP TECH LUMBER JACK, Руководство пользователя

Страница: 50 / 101

5HSODFHSRZHUER[
1.Turn off the power, open the lower rear maintenance door with the key, unplug one
connecting terminal.
2.Unplug six connecting terminals, remove six screws with the screwdriver, then
remove the power box.Replace new and install it in reverse order (firstly insert the
terminals back according to the labels and insert the terminals back according to the
side of pin seat).
&KDUDFWHUDVVHPEO\FKDQJH
1.Repeat 5.2.8-5.2.9 operation, remove the character assembly; remove two nuts with
the screwdriver, then remove the character PVC.
2.Remove one screw with the screwdriver, then remove the rack snap spring and the
slider stop.
3.Remove four screws with the screwdriver, then remove the hardware.
4.Remove three screws with the screwdriver, then remove the bearing.Replace new and
install it in reverse order.
/56 /56
LRS-100-5 LRS-100-5
LRS-450-12 LRS-450-12