WAHLAP TECH LUMBER JACK, Руководство пользователя

Страница: 20 / 101

K4 Exit
K2 Previous item
K1 Next item
,QSXWWHVWRXWSXWWHVWDQGRWKHUVHOIWHVWV
1.Open the front maintenance door with the key and find the service panel.
2.Turn on the power of the machine, at the same time, press[Test] key continuously to
enter into the test mode, press key to move to next item, press key to move to
previous test, when the test finishes, press key to quit the test.
1
2 、 3
2 、 3
4
5
6
After finishing all tests, press key to quit the test.
7HVW0HQX
No. Test items Remarks
1 Redemption TEST
In test mode, insert the lottery properly, press the start button, when the lottery machine sends
out one lottery, it shows the lottery machine is OK, otherwise, it shows the lottery machine or
the lines are faulty.
2 Motor FWD & Sensor
In test mode, press key to choose the test item of JP
˄
Bonus
˅
Ticket control [Motor FWD &
Sensor], and the motor drives the slice to move forward, when the photoelectric board 1, the
photoelectric board 2 and the photoelectric board 3 are sensed, it makes three kinds of sound
(ONE, TWO, THREE), if so, it shows the JP
˄
Bonus
˅
Ticket control motor moves forward and
the photoelectric board is OK, if the motor does not move, it shows the motor is faulty, if the
motor can moves and it does not make three kinds of sound, it shows the photoelectric board
is faulty.
3 Motor back & Sensor
In test mode, press key to choose the test item of JP
˄
Bonus
˅
Ticket control [Motor back &
Sensor], and the motor drives the slice to move backward, when the photoelectric board 1, the
photoelectric board 2 and the photoelectric board 3 are sensed, it makes three kinds of sound
(ONE, TWO, THREE), if so, it shows the JP
˄
Bonus
˅
Ticket control motor moves backward and
the photoelectric board is OK, if the motor does not move, it shows the motor is faulty, if the
motor can moves and it does not make three kinds of sound, it shows the photoelectric board is
faulty.
4 >>AxeMagnet TEST In test mode, press the start button to make pick-up contact once.
5 #1Slide Magnet TEST In test mode, press the start button to make pick-up contact again and again.
6 #2Slide Magnet TEST In test mode, press the start button to make pick-up contact again and again.
,
,
, ,
,