
4
.1
4
.1
Connecting Your Freedom Collar
Connecting Your Freedom
Collar
1
2
NAVIGATE TO THE DEVICE SETUP SCREEN
Depending on the status of your account, you may already
be at the Device Setup screen when you login. If not, open
up the Main Menu by t
apping on the three lines in the
upper left, select “
Devices
”, and hit the
Add button ( ).
SELECT “FREEDOM COLLAR”
If you get a
“Finish device registration” message, then
your account was not setup properly
or the collar was
not successfully pre-registered
(pages 2.1-2.3).
Log back into
setup.wagz.com
and make sure your
collar and subscription plan are complete.
Check that
the serial number you entered is correct. It should be
10 digits long and may or may not include letters.
Once the collar is ready in your account, it will show
"Pending" status.