WAGO I/O System 750
Mounting 23
750-600/000-001 End Module with Potential Group
Manual
Version 1.0.1
4
Mounting
Do not work when devices are energized!
High voltage can cause electric shock or burns.
Switch off all power to the device prior to performing any installation, repair or
maintenance work.
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury. Do not touch the blade contacts.
Do not contaminate contacts!
Contamination may negatively impact the functionality of data and power jumper
contacts. Do not touch the contacts. Avoid contaminating the contacts.
Pay attention to potential equalization from the environment!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, please ensure that
environmental factors (personnel, work space and packaging) are properly
equalized. Do not touch any conducting parts, e.g., data contacts.
Follow the installation instructions!
Only install this device in dry, indoor rooms.
Do not install the device on or in the vicinity of easily flammable materials!
4.1
Mounting Sequence
Fieldbus couplers, controllers and I/O modules of the WAGO I/O System 750 are
snapped directly on a carrier rail in accordance with the European standard EN
60175 (DIN 35).
The reliable positioning and connection is made using a tongue and groove
system. Due to the automatic locking, the individual devices are securely seated
on the rail after installation.
