10
•
751-3002 [AS-Interface Module 4IN 24V A/B]
Display
Elements
WAGO-I/O-SYSTEM
751
AS-Interface Components IP67
2.1.1.3.3 Programming Connector
The PGM connection is the programming connector. It is a plug for a DC
socket which is compatible with all popular programming adapters, for
example Fuchs VAZ-PK-1.5M-V1-G.
Please note manufacturer documentation for the operation of the programming
device.
Warning
After use, the programming connector must be sealed again with a protective
cap!
2.1.1.4 Display Elements
Tab. 2.1.1-2: Display Elements
LED
Designation
Status
Function
off
Input 1, Signal voltage (0)
IN 1
yellow
Status
DI1
on
Input 1, Signal voltage (1)
off
Input 2, Signal voltage (0)
IN 2
yellow
Status
DI2
on
Input 2, Signal voltage (1)
off
Input 3, Signal voltage (0)
IN 3
yellow
Status
DI3
on
Input 3, Signal voltage (1)
off
Input 4, Signal voltage (0)
IN 4
yellow
Status
DI4
on
Input 4, Signal voltage (1)
off OK
on Configuration
error
FID/
FAULT
red
Error
blinking
Short circuit / sensor
supply overload
off
AS-Interface supply error
IN 3
IN 4
IN 1
IN 2
FID/FAULT
ASI
IR
Fig. 2.1.1-3: Display
Elements
gq30012x
ASI
green
AS-Interface
supply
on
AS-Interface supply OK
2.1.1.5 Operating Elements
Above the programming connector is an infrared sensor for communication
with a programming device with optical interface. Please note manufacturer
documentation for the operation of the programming device.
