WAGO-I/O-SYSTEM 750
Quickstart Description
23
750-880 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0
3.2.3.1
Determine the IP address of your PC and change it if required
The explanation below describes how to determine the IP address currently set for
your PC and how to change it if required.
1.
Connect the ETHERNET port of your PC to one of the two ETHERNET
ports of the fieldbus controller using the patch cable provided with the
system in order to set up an ETHERNET link.
2.
The IP address for your computer can be determined in Windows at:
Start > Control panel > Network and release center > Change adapter
settings > LAN connection.
Right click on the option
PROPERTIES
for the network you are currently
using (LAN connection X).
3.
Mark the item "Internet Protocol Version 4 (TCP/IPv4)" in the popup list
and confirm by clicking
[PROPERTIES]
.
Figure 15: Properties of your LAN connection
