WAGO I/O-SYSTEM 750 Скачать руководство пользователя страница 415

Страница: 415 / 450

WAGO-I/O-SYSTEM 750

Appendix 415

750-882 Media Redundancy ETHERNET Controller

Manual

1.5.0

16.1.3 IP Group

The IP group contains information about IP communication.

Table 479: MIB II – IP Group

Identifier

Entry

Access Description

1.3.6.1.2.1.4.1

ipForwarding

R/W 1: Host is a router; 2: Host is not a router

1.3.6.1.2.1.4.2

ipDefaultTTL

R/W Default value for the Time-To-Live field of each

IP frame.

1.3.6.1.2.1.4.3

ipInReceives

Number of received IP frames, including those

received in error.

1.3.6.1.2.1.4.4

ipInHdrErrors

Number of received IP frames with header

errors.

.3.6.1.2.1.4.5

ipInAddrErrors

Number of received IP frames with a

misdirected IP address.

1.3.6.1.2.1.4.6

ipForwDatagrams

Number of received IP frames passed on

(routed)

1.3.6.1.2.1.4.7

ipUnknownProtos

Number of received IP frames with an unknown

protocol type.

1.3.6.1.2.1.4.8

ipInDiscards

Number of received IP frames rejected

although no disturbance was present.

1.3.6.1.2.1.4.9

ipInDelivers

Number of received IP frames passed on a

higher protocol layer.

1.3.6.1.2.1.4.10

ipOutRequests

Number of sent IP frames

1.3.6.1.2.1.4.11

ipOutDiscards

Number of rejected IP Frames that should have

been sent.

1.3.6.1.2.1.4.12

ipOutNoRoutes

Number of sent IP frames rejected because of

incorrect routing information.

1.3.6.1.2.1.4.13

ipReasmTimeout

Minimum time duration until an IP frame is re-

assembled.

1.3.6.1.2.1.4.14

ipReasmReqds

Minimum number of the IP fragments for

building up and passing on.

1.3.6.1.2.1.4.15

ipReasmOKs

Number of IP frames re-assembled

successfully.

1.3.6.1.2.1.4.16

ipReasmFails

Number of IP frames not re-assembled

successfully.

1.3.6.1.2.1.4.17

ipFragOKs

Number of IP frames fragmented and passed

on.

1.3.6.1.2.1.4.18

ipFragFails

Number of IP frames that should have been

fragmented but could not be, because their

don't fragment bit was set in the header.

1.3.6.1.2.1.4.19

ipFragCreates

Number of generated IP fragment frames

1.3.6.1.2.1.4.20

ipAddrTable

Table of all local IP addresses of the

coupler/controller.

1.3.6.1.2.1.4.20.1

ipAddrEntry

Address information for an entry

1.3.6.1.2.1.4.20.1.1 ipAdEntAddr

The IP address corresponding to the entry’s

address information

1.3.6.1.2.1.4.20.1.2 ipAdEntIfIndex

Index of the interface

1.3.6.1.2.1.4.20.1.3 ipAdEntNetMask

The entry's associated subnet mask

1.3.6.1.2.1.4.20.1.4 ipAdEntBcastAddr

Value of the last significant bit in the IP

broadcast address

1.3.6.1.2.1.4.20.1.5 IpAdEntReasm-

MaxSize

The size of the longest IP telegram that can be

defragmented (reassembled) again.

1.3.6.1.2.1.4.23

ipRoutingDiscards

Number of deleted routing entries

Содержание I/O-SYSTEM 750



































































































































































































































































































































































































































































Результаты поиска

Содержание I/O-SYSTEM 750

Отзывы:

Бренды по названию

Популярные бренды

WAGO I/O-SYSTEM 750, Руководство пользователя

Результаты поиска

Содержание I/O-SYSTEM 750

Отзывы:

Бренды по названию

Популярные бренды