36 Connect Devices
787-2861 Electronic Circuit Breaker
Manual
Version 1.3.1
Pos: 63 /Serie 787 (EPSITRON)/Anschließ en/Anschlussbeispi ele/Anschlussbeispiel 787- 2861/0108- 0020 @ 28\mod_1484231491495_21.docx @ 403151 @ 3 @ 1
6.1.2
Connection Example 787-2861/0108-0020
In the connection examples given below, additional relays are connected through
signal output S2. To control a relay, the signal output S2 must be configured to
setting “External Relay Control”.
This setting is described in section “Configuration (787-2861/0108-0020 only)”.
The resulting behavior for signal output S2 is described in section “Signal Output
S2”, Table “Signal Output S2 – Indicators 787-2861/0108-0020”, column
“External Relay Control”.
WAGO offers the following relays for both versions:
Table 18: Relay
Item Number Description
857-304
Socket with a miniature switching relay for TS 35
788-304
Socket with miniature switching relay for TS 35
Connection Example 1: Load Circuit Switched OFF When Device Tripped
Figure 8: Connection Example 1 – 787-2861/0108-0020
In this version, the relay serves also to switch OFF other load circuits if the device
has tripped.
