WAGO-SPEEDWAY 767
Device Description
25
767-5401 4DIO 24V DC 0.2A HS (4xM12)
Manual
Version 1.1.0
3.7.6
Digital Outputs
Table 13: Technical data – Digital Outputs
No. of output channels
4 (0 … 3)
Connection type
4 shielded M12 connectors,
A-coded, 5 poles
Wire connection
2- or 3-wire
Output voltage
≤ U
A
Output current (per channel)
protection
0.2 A
short circuit/overload proof (thermal
disconnection)
Voltage drop against U
A
at 200 mA Max. 2.0 V DC
Output current (per module)
Max. 0.8 A (signals) and
max. 1 A (actor supply)
Leakage current when switched off Typ. 100 µA
Output circuit
Push/Pull
3.7.7
Information on Actuator Selection
Table 14: Technical data – Information on Actuator Selection
“Front end”-delay time 90%)
(hardware)
Max. 0.5 µs
Rise time T
ON/OFF
Typ.
˂ 0.2 µs
“Front end”-jitter/skew
˂ 0.2 µs
Type of load
Inductive, resistive and lamp loads
Switching frequency
Inductive load
Resistive load
Lamp load
on request
on request
on request
Type of protective circuit
External protection (e.g., recovery diodes)
3.7.8
Operating State Influence on Outputs
Table 15: Technical data – Operating State Influence on Outputs
PLC CPU stop
Acc. to substitute value strategy
Interruption of field bus
Acc. to substitute value strategy
Interruption of S-BUS
0 V status
Supply voltage under rated voltage
tolerance
0 V status
Interruption of supply voltage
0 V status
Output operation
Non-latching
Overload behavior
Automatic restart