765-4203/0100-0000
Commissioning
76
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
The
Backup Level
parameter determines the system behavior when a device connected
to the port is replaced in terms of continued operation with unmodified device parameters.
This parameter can have three different values:
Table 55: Possible Values of the
Backup Level
Parameter
Backup Level
Description
Commissioning
(“Disable”)
Parameter data of the old device is not saved for transfer to the new device. There-
fore, if the device is replaced, the new device must be parameterized anew.
Production
(“Backup/Restore”)
Changes to all active parameters within the device are copied and saved. Thus all
parameter data of the old device is stored for transfer to a new device.
Device replacement with automatic or semi-automatic data storage is supported.
Production
(“Restore”)
Changes to all active parameters within the device are not copied and saved. Only
special parameter data of the old device is stored for transfer to a new device.
Device replacement with automatic or semi-automatic data storage is only sup-
ported for these “frozen” parameters.
The
Validation and Backup
drop-down menu offers the following options for setting the
Inspection Level
and
Backup Level
parameters:
Table 56: Setting the
Inspection Levels
and
Backup Levels
for Device Check during Validation and Backup
Selection Option
Inspection Level
Backup Level
Description
No device check
NO_CHECK
Disable
No device check is performed.
Type compatible de-
vice (V1.0)
TYPE_COMP
Disable
Device check for type-compatible device
per IO-Link specification 1.0
Type compatible de-
vice (V1.1)
TYPE_COMP
Disable
Device check for type-compatible device
per IO-Link specification 1.1
Type compatible de-
vice (V1.1) with
restore
TYPE_COMP
Restore
Device check for type-compatible device
per IO-Link specification 1.1 with backup &
restore functionality
Type compatible de-
vice (V1.1) with re-
store
TYPE_COMP
Restore
Device check for type-compatible device
per IO-Link specification 1.1 with restore
functionality
VendorID Input Field
This element contains the expected manufacturer ID (VendorID, 2 bytes) of the con-
nected device. The permissible values range from 1 to 0xFFFF. This information is re-
quired for the device check for type compatibility. It can be omitted if
[No device check]
is selected.
DeviceID Input Field
This element contains the expected device ID (DeviceID, 3 bytes) of the connected de-
vice. The permissible values range from 1 to 0xFFFFFF. This information is required for
the device check for type compatibility. It can be omitted if
[No device check]
is selected.
PortCycleTime Drop-Down Menu
Depending on the selected operating mode, the expected cycle time of the port either can
be selected from the
PortCycleTime
drop-down menu or is merely displayed. The en-
coding corresponds to the one in the port status.
