WAGO 765-4102/0100-0000 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 146

WAGO 765-4102/0100-0000 Скачать руководство пользователя страница 81

765-4102/0100-0000

Commissioning

Product manual | Version: 2.1.0

81

8PORT IOL-B FLD PN DC 24V 2.0A

The

Backup Level

parameter determines the system behavior when a device connected

to the port is replaced with respect to continued operation with unmodified device param-
eters.

This parameter can have three different values:

Table 50: Possible Values of the Backup Level Parameter

Backup Level

Meaning

Commissioning (“Disable”)

Parameter data of the old device is not saved for trans-
fer to the new device. Therefore, if the device is re-
placed, the new device must be parameterized anew.

Production (“Backup/Restore”)

Changes to all active parameters within the device are
copied and saved. Thus all parameter data of the old
device is stored for transfer to a new device.
Device replacement with automatic or semi-automatic
data storage is supported.

Production (“Restore”)

Changes to all active parameters within the device are
not copied and saved. Only special parameter data of
the old device is stored for transfer to a new device.
Device replacement with automatic or semi-automatic
data storage is only supported for these “frozen” pa-
rameters.

The

Validation and Backup

drop-down list offers the following options for setting the

In-

spection Level

and

Backup Level

parameters:

Table 51: Setting the Inspection Levels and Backup Levels for Device Check during Validation and Backup

Selection Option

Inspection Level

Backup Level

Explanation

No device check

NO_CHECK

Disable

No device check is per-
formed.

Type compatible device
(V1.0)

TYPE_COMP

Disable

Device check for type-
compatible device per IO-
Link specification 1.0

Type compatible device
(V1.1)

TYPE_COMP

Disable

Device check for type-
compatible device per IO-
Link specification 1.1

Type compatible device
(V1.1) with re-
store

TYPE_COMP

Restore

Device check for type-
compatible device per IO-
Link specification 1.1 with
backup & restore function-
ality

Type compatible device
(V1.1) with restore

TYPE_COMP

Restore

Device check for type-
compatible device per IO-
Link specification 1.1 with
restore functionality

VendorID Input Field

This element contains the expected manufacturer ID (VendorID, 2 bytes) of the con-
nected device. The permissible values range from 1 to 0xFFFF. This information is re-
quired for the device check for type compatibility. It can be omitted if

[No device check]

is selected.

DeviceID Input Field

This element contains the expected device ID (DeviceID, 3 bytes) of the connected de-
vice. The permissible values range from 1 to 0xFFFFFF. This information is required for
the device check for type compatibility. It can be omitted if

[No device]

is selected.

«
...
79
80
81
82
83
...
»

Содержание 765-4102/0100-0000



















































































































































Отзывы:

Нет отзывов