manualshive.com logo in svg

WAGO 750-872, Быстрый старт

Поделиться
Скачать
WAGO 750-872 Скачать руководство пользователя страница 4

4  •   

Important Notes 

Legal Principles 

  

WAGO-I/O-SYSTEM 

750 

 

 

Telecontrol Quick-Start Manual 

1 Important Notes 

To ensure fast installation and start-up of the units described in this manual, 
we strongly recommend that the following information and explanations are 
carefully read and adhered to. 

1.1 Legal Principles 

1.1.1 Copyright 

This manual including all figures and illustrations contained therein is subject 
to copyright. Any use of this manual which infringes the copyright provisions 
stipulated herein, is not permitted. Reproduction, translation into other 
languages and electronic and photographic archiving and amendments require 
the written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden. 
Non-observance will entail the right of claims for damages. 

WAGO Kontakttechnik GmbH & Co. KG reserves the right to enact changes 
that serve technical progress. All rights developing from the issue of a patent 
or the legal protection of utility patents are reserved by WAGO 
Kontakttechnik GmbH & Co. KG. Third-party products are always indicated 
without any notes concerning patent rights. Thus, the existence of such rights 
must not be excluded. 

1.1.2 Personnel 

Qualification 

The use of the product described in this manual is exclusively geared to 
specialists having qualifications in PLC programming, electrical specialists or 
persons instructed by electrical specialists who are also familiar with the 
appropriate applicable standards. WAGO Kontakttechnik GmbH & Co. KG 
declines any liability resulting from improper action and damage to WAGO 
products and third-party products due to non-observance of the information 
contained in this manual. 

1.1.3 Intended 

Use 

For each individual application, the components are supplied from the factory 
with a dedicated hardware and software configuration. Modifications are only 
admitted within the framework of the possibilities documented in the manuals. 
All other changes to the hardware and/or software and the non-conforming use 
of the components entail the exclusion of liability on the part of WAGO 
Kontakttechnik GmbH & Co. KG. 

Please direct any requirements pertaining to a modified and/or new hardware 
or software configuration directly to WAGO Kontakttechnik GmbH & Co. 
KG. 

Содержание 750-872













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды