WAGO-I/O-SYSTEM 750 XTR
Modbus – CODESYS 2 329
750-8212/040-010 PFC200 G2 2ETH M12 RS XTR
Manual
Version 1.0.0, valid from FW version 03.01.07(13)
10.5.5 Modbus Constants Registers
Registers 0x2000 … 0x2008 provide constants based on the table “WAGO
Modbus Registers”. It is possible to read all of the constants, or a consecutive
portion of them at once.
10.5.6 Electronic Nameplate
Registers 0x2010 to 0x2015 contain information from the electronic nameplate. It
is possible to read the entire nameplate or a consecutive portion of it all at once.
10.5.6.1 Register 0x2010 – Revision (Firmware Index)
This register provides the consecutive revision index (firmware index) for the
controller.
Example: 5 for Version 5.
10.5.6.2 Register 0x2011 – Series Designator
This register provides the designation (ID) for the WAGO series (Series Code) for
the controller.
Example: 750 for WAGO-I/O SYSTEM 750.
10.5.6.3 Register 0x2012 – Device ID
This register provides the device ID (WAGO Item No.) of the controller.
Example: 8206.
10.5.6.4 Register 0x2013 – Major Firmware Version
This register provides the major part for the firmware version.
10.5.6.5 Register 0x2014 – Minor Firmware Version
This register provides the minor part for the firmware version.
10.5.6.6 Register 0x2015 – MBS Version
This register provides the version of the Modbus slave library. The high byte
contains the major version number and the low byte, the minor version number.
Example:
0x010A => Major version number = 1, Minor version number = 10.
