WAGNER Tribo PEA-T3, Руководство по эксплуатации

Страница: 6 / 32

Safety regulations
6
351874
- PEA-T3
03/2008
010102_ .doc

Wear suitable work clothing

Use breathing protection or a vizard for work
which produces powder and when
developing solvent steams:
Avoid health dangers by inhalation and skin
contacts of solvent steams and lacquer
aerosols; Cornea injuries by splashes in the eye.

Check the equipment for damage
Before operating the system, check if slightly
damaged parts still function correctly. Check
whether the moving parts operate properly,
whether they jam and whether parts are
damaged.
Damaged parts should be repaired or
replaced by a Wagner customer service.
Warning
For your own safety, use only accessories and equipment listed in the
operating manual. The use of individual parts other than those
recommended in the operating manual may create a hazard to personal safety.
Use only original Wagner replacement parts!
Alteration or repair of Wagner original spare parts may cause fatal
accidents or explosions in the coating system!
1.2 EC Declaration of conformity
0103_ .doc
Wagner hereby declares that the unit described in these operating instructions has been
designed and manufactured according to the provisions of EU Directives 98/37/EG,
94/9/EG, 73/23 EWG and 89/336 EWG.
The following European standards were applied:
EN 12100-1/-2 EN 50281-1-1/-1-2 EN 61000-6-1
EN 61000-6-2 EN 61000-6-3 EN 60204-1
EN 50053-2 EN 50050 EN 50177
The following German standards and/or Guidelines were applied:
BGI 764
There is an EC Declaration of Conformity with the product. This can be ordered again if
necessary from your WAGNER dealer by giving details of the product and serial number
involved.
The number of the EC Declaration of Conformity is 351962 .