WAGNER Tribo PEA-T3, Руководство по эксплуатации

Страница: 10 / 32

Preparing the spray gun
10
351874
- PEA-T3
03/2008
2.3 Grounding
For safety reasons, the spray gun must be properly grounded. This occurs through the gun
mounting.
0203_ .doc
Good grounding of the work piece is also necessary for optimum powder coating.
A poorly grounded work piece causes:

dangerous electric charging of the work piece

back-spray onto spray gun and user

uneven coating

very bad wrap around
Warning
Sparks between conveyor, conveyor hooks (hangers) and work piece can occur
if electric contact points between conveyor, conveyor hooks (hangers) and
work piece are not sufficiently cleaned and therefore the work pieces are not
sufficiently grounded!
These sparks can cause heavy radio frequency interference.