WAGNER SUPER FINISH 23 CR, Руководство по эксплуатации

Страница: 30 / 120

30
Super Finish 23 CR
EN
3.2
COATING MATERIAL
Diluting lacquers and paints or those containing solvents, two-
component coating materials, dispersion and latex paints.
Injection foams (one and two-component)
Injection resin (one and two-component)
No other materials should be used for spray-
ing without WAGNER‘s approval.
Pay attention to the Airless quality of the
coating materials to be processed.
The unit is able to process coating materials with up to
20,000 mPas. If highly viscous coating materials cannot be tak-
en in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer‘s instructions.
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles
are stirred in. Air bubbles disturb when spray-
ing and can, in fact, lead to interruption of
operation.
3.2.1
COATING MATERIALS WITH SHARP-EDGED
ADDITIONAL MATERIALS
These particles have a strong wear and tear effect on valves
and tips, but also on the heating hose and spray gun. This im-
pairs the durability of these wearing parts considerably.
3.2.2
FILTERING (FOR SPRAY WORK)
Sufficient filtering is required for fault-free operation. To this
purpose the unit is equipped with a suction filter and an inser-
tion filter in the spray gun. Regular inspection of these filters
for damage or soiling is urgently recommended.
3.3
TWO-POSITION OPERATION
The Super Finish 23 CR can be used both horizontally and ver-
tically.
a) Horizontal operation:
For use with a top tank or for direct suction with a flexible
suction system.
b) vertical operation:
For direct intake with a rigid suction system.
GENERAL VIEW OF APPLICATION / DESCRIPTION OF UNIT