28
ProSpray 3.25
GB
Description of unit
Starting operation
3.5
Technical data
Voltage:
220-240 Volt , 50/60 Hz
Max. current consumption:
6.5 A @ 230VAC
Power cord:
YNN
2
– 6 m
Acceptance capacity:
1100 Watt
Max. operating pressure:
CBS .1B
Volume flow at 12 MPa
(120 bar) with water:
2.6 l/min
Max tip size:
0.027 inch – 0.69 mm
Max. temperature of the
coating material:
$
Max viscosity:
.1BpT
Weight:
Stand:
17.9 kg
Cart:
27.4 kg
Special high-pressure hose:
%/NNNDPOOFDUJPO
UISFBE.Y
Dimensions (L X W X H):
4UBOE
YYNN
)JHIDBSU
YYNN
Max sound pressure level:
80 dB (A) *
* Place of measuring: 1 m in distance from the unit and 1.6
NBCPWFUIFóPPS.1B CBSPQFSBUJOHQSFTTVSF
reverberant floor.
3.6
Transportation
Pushing or pulling the unit
Pull out the handle (Fig. 2, Item 1) until it will come no further. Insert
the handle – push the buttons (2) on the spars, and then push in the
handle.
2
1
2
3.7
Transportation in vehicle
Secure the unit with a suitable fastening.
4.
Starting operation
4.1
High-pressure hose, spray gun and separating
oil
1. Screw the high-pressure hose (2) to the coating material
outlet (Fig. 3, Item 1).
2. Screw the spray gun (3) with the selected tip onto the high-
pressure hose.
3. Tighten the union nuts at the high-pressure hoses firmly so
that coating material does not leak.
3
1
2
4. Remove the oil cup cap with a straight-slot screwdriver.
5. Fill the oil cup with EasyGlide (Fig. 4) until the oil gauge (4) is
showing that it is full.
Attention
EasyGlide prevents increased wear and tear to the
packings.
6. Replace oil cup cap.
7. Press oil button 2-5 times to prime the oiler. Press once for
every eight hours of usage to lubricate the fluid section.
8. Fully depress the pusher stem to make sure the inlet ball is
free.
