10
DESCRIPTION OF UNIT / STARTING OPERATION
ProSpray 20
3.5
TECHNICAL DATA
Voltage
100-110 VAC~, 50/60 Hz or
220-240 VAC~, 50/60 Hz
Max. current consumption
100-110 VAC~
220-240 VAC~
11.0 A
5.3 A
Power Cord
See page 88
Max. operating pressure
214 bar (21.4 MPa)
Volume flow at 12 MPa
(120 bar) with water
1.62 l/min
Max tip size
0.021 inch – 0.53 mm
Max. temperature of the coating material
43°C
Max viscosity
20.000 MPa·s
Weight
15.2 kg
Special high-pressure hose
6,35 mm, 15 m - 1/4” - 18 NPSM
Dimensions (L X W X H)
480 x 360 x 405 mm
Vibration
Spray gun does not exceed 2.5m/s
2
Max sound pressure level
80 dB*
* Place of measurement: 1 m distance from unit and
1.60m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
3.6
TRANSPORTATION IN VEHICLE
Secure the unit with a suitable fastening.
4
STARTING OPERATION
4.1
HIGH-PRESSURE HOSE, SPRAY GUN AND
SEPARATING OIL
1.
If equipped, screw the pressure gauge (1) to the coating
material outlet (Fig. 2, Item 2).
2.
Screw the high-pressure hose (3) to the coating material
outlet (Fig. 2, Item 4).
3.
Screw the spray gun (5) with the selected tip onto the
high-pressure hose.
4.
Tighten the union nuts at the high-pressure hoses firmly
so that coating material does not leak.
1
4
2
3
5
5.
Fill the oil cup with EasyGlide (Fig. 3). Do not use too much
EasyGlide, i.e. ensure that no EasyGlide drips into the
coating material container.
Attention
EasyGlide prevents increased wear and tear to
the packings.
