WAGNER Basic 8000, Перевод оригинального руководства по эксплуатации

Страница: 8 / 36

8
Basic 8000 .
OPERATING MANUAL
VERSION 12/2010 ORDER NUMBER DOC 3305595
2.2.4
CLEANING
2.3
USING IN ACCORDANCE WITH THE INSTRUCTIONS
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
œ 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
œ /PERATETHEUNITONLYASANENTIREUNIT
œ $ONOTDEACTIVATESAFETYEQUIPMENT
œ 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES
2.2.5
HANDLING POWDER PAINTS
œ
De-energize the unit electrically.
œ
Disconnect the pneumatic supply line.
œ
Relieve the pressure from the unit.
œ
Secure the control unit against being switched back on without authorisation.
œ
Only mobile industrial vacuum cleaners of design 1 (see EN 60335-2) may be used for
getting rid of dust build-ups.
œ Take note of the processing regulations laid down by the manufacturer of the powder
paint being used, when preparing or processing the powder.
œ Take note of the manufacturer’s advice and the relevant environmental protection
regulations when disposing of powder paints.
œ Implement the prescribed safety measures, in particular the wearing of safety glasses
and safety clothing as well as the use of protective hand cream.
œ Use dust masks or breathing apparatus.
œ To ensure sufficient protection of health and the environment, only operate the device
in a powder booth or at a spray wall with activated ventilation (exhaust air).
2.4
USE IN AN EXPLOSION HAZARD AREA
2.4.1
USING IN ACCORDANCE WITH THE INSTRUCTIONS
The device is suitable for processing powder-type materials according to the explosion
group categorization.