manualshive.com logo in svg

WAGNER Basic 8000, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER Basic 8000 Скачать руководство пользователя страница 21

21

Basic 8000

.

OPERATING MANUAL

VERSION 12/2010

ORDER NUMBER DOC 3305595

6.4 

PERFORMING A COLOR CHANGE

SIHI_05015_ENG

WARNING

Dust development!

Risk of poisoning.
Danger due to escaping dust, contamination of device and device
components.

œ

During every color change, the suction system of the booth and
the filter cleaning system must remain activated!

In the case of a color change, powder residues must be thoroughly removed from all the 
powder-conveying parts throughout the complete coating system.

Procedure:

1.  Keep the suction system of the booth with the fi lter cleaning system activated.
2.  Switch off the powder feed and the high-voltage for the spray gun and secure them 

against being switched on unintentionally.

3.  Clean the parts of the powder feed system and the interior of the boot.
4.  Scrape the color powder from the booth walls with a rubber scraper and remove it 

with a suitable industrial vacuum cleaner.

5.  For recovery operations, replace the fi lter cartridges (1set of cartridges per color). Store 

the cartridges in their packaging.

6.  Coating can be continued with the new color powder.

Содержание Basic 8000





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды