WAGNER 2310478, Перевод оригинального руководства по эксплуатации

Страница: 7 / 40

VM 500
VERSION 09/2018 ORDER NUMBER DOC 2318724
7
2 CORRECT USE
2.1 DEVICE TYPE
VM 500 control unit for controlling GM 5000EA or GM 5000EAC electrostatic spray guns.
2.2 TYPE OF USE
WAGNER's VM 500 electrostatic control unit controls and regulates the high-voltage supply
to the GM 5000EA or GM 5000 EAC spray guns used to apply liquid coating media.
The VM 500 may only be operated together with the above-mentioned manual spray guns.
If the control unit is operated in combination with devices other than the above-mentioned
spray guns, the SIRA authorization (type approval) ceases to be valid.
These electrostatic manual spray guns are suitable for spraying liquid products, in particular
coating products that follow AirCoat or Airspray techniques. Coating products containing
solvents of explosion class II A may be used.
WAGNER forbids any other use!
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
The control unit may only be operated if all parameters are set and all measurements/safety
checks have been carried out correctly.
2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The control unit is designed, together with the spray gun, in accordance with the
2014/34/EU (ATEX) directive. The spray gun is suitable for use in the potentially explosive
area of zone 1 and the control unit in the zone 2 area.
(See Chapter 3 : Explosion Protection Identification.)
IP code IP54 is only guaranteed if all sealed elements in the control unit are present and
undamaged. During operation, all electric connections of the control unit have to be tightly
sealed with the corresponding plug connectors or closing elements.
2.4 MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g. powder are processed;
no food, medicine or cosmetics are processed.