Wagan 2395-5ECF, Руководство пользователя

Страница: 3 / 11

Smart AC
®
150 USB+
™
by Wagan Tech
®
3
www.wagan.com
©2012 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
4
• Do not connect the inverter directly to another AC power
source. Damage may result, and such damage will void the
warranty.
• Keep away from children.
• Use common sense. This device produces power just like your
wall outlets at home and should be treated seriously.
• Know the wattage requirements of your appliance: only
operate items which are 150 watts or less.
• This inverter’s output wave is modified sine wave. Medical
equipment cannot be used with this inverter.
Basic Operation
1. Verify the fuse size of your vehicle cigarette lighter socket. If
the fuse is a 10A fuse, your output will be limited to 120W.
Most recent vehicle models come with 15A fuses.
2. Connect one end of the DC cord to the “12 V DC in” of the
inverter and the other end into the cigarette lighter socket of
your vehicle. The power indicator light will come on to confirm
that AC power is present.
3. Insert the AC plug of your appliance into the AC socket at the
side of the inverter. (Respectively, the USB head into the USB
power port.)
4. If the LED light is blinking, please refer to the troubleshooting
section.
5. If the LED light is solid blue, you have 150 watts of power for
your AC appliances.
Battery Use
1. To avoid over-discharging your vehicle’s battery, we
recommend running your engine for 10–20 minutes to
recharge the vehicle’s battery after every 2–3 hours of
operating the inverter.
2. If you choose to use on adapter to connect the inverter directly
to your battery terminals, it is important to connect the ‘+’ wire
to the ‘+’ terminal and the ‘−‘ wire to the ‘−‘ terminal. IF YOU
CONNECT THE WIRES TO THE INCORRECT TERMINALS, YOU
WILL REVERSE THE POLARITY AND DAMAGE THE INVERTER.
REVERSED POLARITY WILL INSTANTLY VOID THE WARRANTY
OF YOUR INVERTER.
3. If you choose to operate a battery charger to replenish
your battery’s voltage, be sure to disconnect the inverter
first. Failure to disconnect the inverter prior to connecting a
charger may result in on input spike which will damage the
inverter. CONNECTING THE INVERTER’S INPUT TO BATTERY
CHARGER WILL VOID THE WARRANTY, AND MAY DAMAGE
THE INVERTER.