Waeco PerfectView M59L, Инструкция по установке и эксплуатации

Страница: 49 / 248

PerfectView
Installing the LCD monitor
49
Creating a through-hole for the monitor connection cable (fig.
k
,
page 9)
I
Note
Where possible, use available openings, such as ventilation grilles,
panel edges or blank panels to feed the connection cables through.
If there are no existing openings, you must drill a hole with a 13 mm
diameter. Check beforehand that there is sufficient room for the drill
head to come out on the other side.
➤
Drill a hole of Ø 13 mm near the monitor.
➤
Deburr all drill holes that have been made in the sheet metal and apply
rust-protection.
➤
Place cable sleeves in all sharp-edged ducts.
Connecting the monitor to the voltage supply
The circuit diagram for the LCD monitor can be found in fig.
l
, page 10.
The following abbreviations for the colour coding of the connection cables
are used:
No. in fig.
l
,
page 10
Description
1 Control box
2 Switch for the vehicle light
3 Switch for the reversing light
4 Ignition socket
5 Branch connector or soldering point
6 Indicator
7 Instrument illumination
8 Reversing light
15 Terminal 15 (connected positive terminal)
31 Terminal 31 (earth)
br ge or rt sw ws
brown yellow orange red black white
_M59L_EB_10s.book Seite 49 Dienstag, 22. Januar 2008 4:59 16