Waeco PerfectView M170L, Инструкция по установке и эксплуатации

Страница: 37 / 148

PerfectView M170L
Cleaning and maintaining the LCD monitor
37
I
Note
You can reset the monitor to the factory settings for brightness, contrast, tint and
volume.
To do this, proceed as follows:
➤
Press the "MENU" button ( 3 ) five times .
➤
Press the "–" button ( 2 ), to reset the device to the factory settings.
➤ Press the "MENU" button ( 3 ) to exit setup mode.
9 Cleaning and maintaining the LCD monitor
e
Caution!
Remove the cable before cleaning the monitor to prevent short circuiting.
a
Caution
Do not use sharp or hard objects or cleaning agents for cleaning as these may
damage the device.
➤
Occasionally clean the device with a damp cloth.
10 Guarantee
The statutory warranty period applies. If the product is defective, please contact the man-
ufacturer's branch in your country (see the back of the instruction manual for the address-
es) or your retailer.
For repair and guarantee processing, please include the following documents when you
send in the device:
z A copy of the receipt with purchasing date
z
A reason for the claim or description of the fault
11 Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever possi-
ble.
M
If you wish to finally dispose of the device, ask your local recycling centre or spe-
cialist dealer for details about how to do this in accordance with the applicable
disposal regulations.
_M170L.book Seite 37 Mittwoch, 9. Juli 2008 2:50 14