Mounting the monitor
PerfectView M170L
32
6.3
Creating clean soldering joints
Proceed as follows to solder a cable to the original cables (fig.
7
, page 5):
➤
Strip approx. 10 mm of insulation from the end of the original cable (
A
).
➤
Strip approx. 15 mm of insulation from the end of the cable to be connected (
B
).
➤
Wind the cable to be connected around the original cable and solder the two cables
together (
C
).
➤
Insulate the two cables with insulating tape (
D
).
Proceed as follows to solder two cables together (fig.
8
, page 5):
➤
Strip the two cables (
A
).
➤
Place a shrink sleeve with a length of approx. 20 mm over the cable (
B
).
➤
Twist the cables together and solder them (
C
).
➤
Place a shrink sleeve over the soldered point and heat it briefly (
D
).
7
Mounting the monitor
7.1
Tools required (fig.
1
, page 3)
For
installation and assembly
you will need the following tools:
z
Measuring ruler (
4
)
z
Centre punch (
5
)
z
Hammer (
6
)
z
Drill bit set (
7
)
z
Drill (
8
)
z
Screwdriver (
9
)
To make and test the
electrical connection
, the following tools are required:
z
Diode test lamp (
1
) or voltmeter (
2
)
z
Insulating tape (
10
)
z
Heat shrinking sleeve
z
Hot air blower (
11
)
z
Crimping tool (
12
)
z
Soldering iron (optional) (
13
)
z
Solder (optional) (
14
)
z
Cable bushing sleeves (optional)
Depending on the individual installation requirements you may require bolts, nuts, wash-
ers, self-tapping screws and cable binders other than those including in the scope of de-
livery.
_M170L.book Seite 32 Mittwoch, 9. Juli 2008 2:50 14
Содержание PerfectView M170L
