MyFridge MF-40
Operating the cooler
23
e
Caution – danger of damaging the device
Make sure that the polarity is correct.
➤
Make sure that the cable at the positive battery terminal (fig.
2
2,
page 3) is protected with a 15 A fuse (fig.
2
3, page 3).
➤
Connect the brown cable (fig.
2
br, page 3) to the positive terminal of the
battery (fig.
2
2, page 3).
➤
Connect the blue cable (fig.
2
bl, page 3) to the negative terminal of the
battery (fig.
2
2, page 3).
➤
You can extend the cable if necessary, but only with a cable according to
the following table:
7
Operating the cooler
I
Note
Before starting your new cooler for the first time, you must clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter “Cleaning and maintenance” on page 25).
7.1
Energy saving tips
z
Choose a well ventilated location which is protected from direct sunlight.
z
Allow hot food to cool down first before you place it into the device.
z
Do not open the cooling device more often than necessary.
z
Do not leave the door open for longer than necessary.
z
Arrange the food in the cooler so that air can circulate inside.
Cable length
Cable cross section
Up to 2.5 m
2.5 mm²
2.5 m to 4 m
4 mm²
4 m to 6 m
6 mm²
6 m to 10 m
10 mm²
_mf-40.book Seite 23 Montag, 3. Dezember 2007 11:08 11
