MagicWatch MW650
Testing functions
41
Be very careful when you first operate the device, and make sure you get to
know the various sequences of beeps.
In Zone 4 it can occur that obstacles are not detected, because
they are no longer within range of the sensors (depending on
design).
The device is equipped with a diagnostic function: If the sensors are defec-
tive, you will hear three short beeps when you engage reverse gear.
Zone Description (see fig. 5, page 5)
Sound sequence
1
From a distance of around 2,5 m, (meas-
ured from the sensor), MagicWatch
detects any obstacles and indicates them
in the display. The blue LED lights up.
–
2
From a distance of around 1.5 m
(measured from the sensor), MagicWatch
signals obstacles with a series of slow
beeps from the piezoelectronic speaker.
The green or yellow LEDs light up.
Beep
Beep
Beep
Beep
3
From a distance of around 0.95 m (meas-
ured from the sensor) MagicWatch
switches to the medium sequence. The
yellow or red LEDs light up.
Beep Beep Beep
Beep Beep Beep
4
At a distance of around 0.4 m (measured
from the sensor) and below, MagicWatch
switches to the continuous tone. The
round red LED lights up. When you reach
this zone, stop the vehicle.
Otherwise you might damage the vehicle
or the obstacle.
Beeeeep…
MW-650-4DSM.book Seite 41 Dienstag, 16. Mai 2006 4:28 16
Содержание MagicWatch MW650
Страница 3: ...MagicWatch MW650 3 1 2 3 4 9 6 8 5 7 1 MW 650 4DSM book Seite 3 Dienstag 16 Mai 2006 4 28 16...
Страница 4: ...MagicWatch MW650 4 4 1 3 5 6 2 4 2 3 MW 650 4DSM book Seite 4 Dienstag 16 Mai 2006 4 28 16...
Страница 7: ...MagicWatch MW650 7 14 A B B B B 15 A B 16 MW 650 4DSM book Seite 7 Dienstag 16 Mai 2006 4 28 16...
Страница 8: ...MagicWatch MW650 8 2 3 31 1 17 MW 650 4DSM book Seite 8 Dienstag 16 Mai 2006 4 28 16...
