Waeco CoolFun CA-35, Инструкция по эксплуатации

Страница: 10 / 16

CoolFun CA-35
11
10
Replacing the gas bottle
Only change the gas bottle in well ventilated areas.
Make sure that there are no sources of ignition in the vicinity.
Only change the gas bottle when the cooler is switched off.
➤
Switch off the cooler by completely shutting the rotary switch ( 2 3, page 4) by turning it
clockwise.
➤
Completely close the valve on the gas bottle.
➤
Unscrew the valve from the bottle.
➤
Check the condition of the hose line.
Replace the hose line if the material is brittle or porous.
➤
Screw the pressure regulator tightly onto the new bottle.
Defrosting the cooler
Humidity can form frost in the interior of the cooler. This reduces the cooling capacity.
Defrost the device in good time to avoid this.
Caution!
Never use hard or pointed tools to remove ice or to loosen objects which have frozen
in place.
To defrost the cooler, proceed as follows:
➤
Take out the contents of the cooler.
➤
Place them in another cooling device to keep them cool, if necessary.
➤
Switch the cooler off.
➤
Leave the cover open.
➤
When everything has defrosted, empty the cooler and wipe it out.
Switching off and storing the cooler
If you do not intend to use the cooler for a long time, proceed as follows:
➤
Switch the cooler off.
➤
Disconnect the power supply or the hose line to the gas bottle.
➤
Clean the cooler (see “Cleaning and maintenance” below).
➤
Leave the cover slightly open. This prevents odours from building up.
7 Cleaning and maintenance
Caution!
Before cleaning the cooler disconnect the power cable or the hose line.
Caution!
Do not clean the cooler under running water or in dish water.
Caution!
Do not use abrasive cleaning agents or hard objects during cleaning as these can
damage the cooler.
➤
Clean the interior of the cooler with a damp cloth from time to time.
➤
Clean the exterior of the device with a damp cloth.