Waeco AirConServiceCenter ASC1000, Руководство по эксплуатации, Страница: 85 / 268

EN
85
AirConServiceCenter Operation
5. Select “Rec/Recycling phase ? ” (which then flashes) and press
ENTER to confirm.
6. For the “Pressure increase Test time ”, enter 1 minute and press
ENTER to confirm.
7. Deselect “Vacuum phase ? ” with No (the chosen setting flashes)
and press ENTER to confirm.
8. Deselect “Filling phase ” with No (the chosen setting flashes) and
press ENTER to confirm.
9. Select “Process start ” with ENTER .
10. Disconnect the system components which cannot be flushed from
the refrigerant circuit. These components are, for example:
– Compressor
– Line filter
– Fixed choke
– Collection containers
– Filter drying units
– Expansion valve
11. Connect the components to be flushed to the service ports ( 14 )
and ( 15 ) of the AirConServiceCenter using special adapters to form
a flushing circuit.
12. In standby mode, use the cursor keys or to select
“Other selections ”:
13. Press ENTER to confirm.
14. Use the cursor keys or to select “Flushing ”:
15. If necessary, enter the desired data with the keypad ( 7 ) and press
ENTER to confirm.
If you do not want to enter any data here, press ENTER to advance
to the next program step.
16. Use the cursor keys or to select whether to flush the entire air
conditioning system or just individual components:
17. Press ENTER to confirm.
18. Follow the instructions in the display.
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset Scales.
Service.
ENTER-OK STOP-EXIT
Full Flushing
Fast Flushing
ENTER-OK STOP-EXIT