Waeco AirConServiceCenter ASC1000, Руководство по эксплуатации, Страница: 75 / 268

EN
75
AirConServiceCenter Operation
6. Enter the refrigerant filling quantity. Either use the value shown on
the filling quantities sticker in the vehicle and enter it using the key-
pad (
7 ) and the cursor keys, or use the AirConServiceCenter’s data-
base.
A
7. Select the setting (which then flashes) and press ENTER to confirm.
Then follow the instructions on the display ( 6 ).
8. If necessary, enter the desired data with the keypad ( 7 ) and cursor
keys and press ENTER to confirm.
If you do not want to enter any data here press ENTER to advance to
the next program step.
If you press
“i ” in database mode, the display ( 6 ) shows information
on the oil quantities and oil types.
I
✓
After the air conditioning service has finished, you are prompted to dis-
connect the hoses (
11 ) and ( 12 ) of the AirConServiceCenter from the
vehicle air conditioning system.
9. Disconnect the service hoses ( 11 ) and ( 12 ) and press ENTER to
confirm.
The service hoses are then emptied. The device is then ready for fur-
ther use.
10. Put the valve caps of the vehicle air conditioning system back on the
connections.
NOTICE!
If in doubt, use the value shown on the label in the vehicle.
NOTE
 If the refrigerant has been contaminated (analysis only possible with
ASC2000RPA), abort the air conditioning service and use the refrig-
erant draining station, WAECO item number 8885200059, to drain
the air conditioning system.
 ASC2000RPA only: if applicable, the message “NCG evacuation”
appears in the display (
6 ) once the recycling phase has been com-
pleted. Non-condensable gases (such as air or oxygen) are auto-
matically released into the surrounding air.