Waeco AirConServiceCenter ASC1000, Руководство по эксплуатации, Страница: 68 / 268

EN
First start-up AirConServiceCenter
68
9. Press STOP . The set data is activated.
10. Press STOP again to go to standby mode.
6.4 Entering the date and time
The date and the time are printed along with the company data on every
service log.
1. In standby mode, use the cursor keys
or to select
“Other selections ”:
2. Press ENTER to confirm.
3. Use the cursor key to select “Service ”.
4. Press ENTER to confirm.
5. Enter the password “8463 ”.
6. Use the keypad and the cursor keys to enter the information.
7. Press
ENTER to confirm.
8. Press STOP to go to standby mode.
6.5 Editing default values
The AirConServiceCenter has preset values for the most important ser-
vice tasks. The default values appear automatically when you select the
respective menu.
You can alter the following default values if necessary:
Short selection
Free selection
Other selections
ENTER-OK
Parameter Default value
Pressure increase Test time min. 5
Vacuum Time min. 20
Leak test min. 4
PAG Oil ml. 10
UV Tracer ml. 7
Filling Qt. g. 500
Print recovery value? Yes
Refrigerant analysis (ASC2000RPA only) Yes
Nitrogen Test (nur ASC2000RPA only) Yes