Wacom GRAPHIRE - FOR MACINTOSH, Руководство пользователя

Страница: 89 / 116

HAVING TROUBLE?
Page 89
Contents
Index
You have to press hard with
the Graphire Pen when clicking
or drawing. Open the Wacom control panel and go to the tool’s T
IP
F
EEL
tab.
Move the T
IP
P
RESSURE
F
EEL
slider toward S
OFT
, or select the M
ORE
O
PTIONS
button and decrease the C
LICK
F
ORCE
setting.
The Graphire Pen tip does not
function. Make sure the status LED changes from orange to green when the tip
is pressed. If it does not, you may have defective hardware (see
Troubleshooting ).
Check the control panel’s T
OOL
B
UTTONS
tab and verify that the tip is
assigned to a C
LICK
function.
The side switch does not work. Be sure you press the side switch when the pen tip is in proximity—do
this without pressing down on the pen tip.
From the Wacom control panel, verify that the side switch is set to the
proper function for the application and tool that you are using.
Make sure the tablet status LED changes from orange to green when
you press the side switch. If it does not, you may have defective
hardware (see
Troubleshooting ).
Changing the function settings
for the Graphire tools has no
effect. Make sure that you change the settings for the tool and the application
that you are using. See
Working with Graphire Tools and Working
with Application-Specific Settings .
The screen cursor jumps back
when using your regular
mouse or trackball. Do not place the Graphire Pen or Cordless Mouse on the tablet when
using another pointing device. Leaving your tool on the tablet may
interfere with screen cursor positioning when using other input
devices.