Wacom DTI-520UB, Руководство пользователя

Страница: 27 / 31

26
The Pen and Side Switch do not Operate Correctly (For Both Windows and Macintosh)
Condition What to Do Reference
The pen nib produces a click even
when only very lightly coming in
contact with the screen.
Use the control panel to set the pen nib sensitivity to Firm
setting.
P.21
The pen does not produce a click
unless excessive pressure is used.
Use the control panel to set the pen nib sensitivity to Soft
setting.
P.21
The pen nib produces a click prior
to coming into contact with the
screen.
Use the control panel to set the pen nib sensitivity to Firm
setting.
When the status lamp turns blue in response to the pen
nib being moved to close proximity to the screen, either
the pen or the tablet is probably defective.
P.21
The pen nib do not work. Please verify that the status lamp turns blue when the
pen nib and side switch are pushed. If the lamp doesn’t
change colours, this probably indicates that either the pen
or the tablet is probably defective.
P.6
The pen cannot be double-clicked
using the pen nib.
If possible, quickly click in the same area.
In the control panel, set the double-clicking interval to a
longer setting and set the pen nib sensitivity to a lighter
setting.
Verify that the double-click speed setting is not too fast in
the regular mouse control panel.
-
P.21
P.21
The pressure function cannot be
used.
Please refer to your software application and the store
where you bought the application to verify whether it
is pressure function-enabled. Some applications have
special settings that must be established before the
pressure function becomes operational.
The tablet driver probably is not installed properly. Try re-
installing it.
-
P.12-13
Condition What to Do Reference
The picture is distorted • Adjust the pitch and phase.
• Verify that your computer display adapter is compatible
with the product.
• Verify that the graphics mode and frequency for the
input signal are compatible with the product.
• Adjust the computer’s refresh rate (vertical frequency)
for optimal display.
P.16-18
-
P.28
P.28
The picture appears wavey
The picture flickers
The picture is not clear •Adjust the contrast and brightness.
•Adjust the pitch and phase.
•Set your computer’s resolution to XGA (1024 x 768). P.16-17
P.16-18
The picture appears doubled or in
triplicate
• Do not add an extension to the video signal cable and
refrain from using the input selector.
• Connect the video signal cable firmly to the connector.
-
-
The picture is out of position • Adjust the pitch and phase.
• Adjust the horizontal and vertical positioning. Depending
on the input signal and video card, the picture may not
entirely fill the screen.
P.16-18
P.16-18
The picture size is incorrect
The picture is dark. • Adjust the brightness. P.16-18
Waves and vertical stripes appear
in the picture.
• Adjust the pitch and phase. P.16-18
The picture colour is uneven. • Adjust the colour temperature. P.16-17
The colour white does not display
as white.
UM-0325(B)_EN.indd 26 09.8.31 6:06:50 PM