background image

 15 

 

Protrusion of the Picture from the LCD Panel and the Blurring of Characters...

  

Caution: 

This setting is effective when the product and computer are connected by a RGB cable.

Depending on the type of computer and graphics board, the Auto-Adjust function is sometimes 
not able to operate at full power, resulting in the picture blurring and protruding from the LCD 
panel. If this happens, adjust the pitch and phase. At 1024 x 768-bit, the resolution is optimally 
adjusted. 

Procedure:

Open  the  Tablet  Control  Panel  (see 
page 21) and select the Calibrate tab. 

Click  on  the  Calibrate...  button.  An 
adjustment  pattern  for  pitch  and 
phase will appear.

U s i n g  t h e  O S D  c o n t r o l s ,  o p e n 
t h e  O S D  M e n u  a n d  t h e  P i t c h 
icon.

P.16,18

Adjusut  the  pitch  level  so  the  pattern 

of fine vertical stripes display evently.

In  the  OSD  Menu,  select  the  Phase 
icon.

Adjust  the  phase  level  so  the 
adj usut men t  pat ter n  sh ows 
clearly.

P.16,18

A f t e r   c o m p l e t i n g   t h e s e 
adjustments,  press  the  ENTER 
and  MENU  buttons  to  exit  the 
OSD Menu.

Click  on  the  CANCEL  button  or 
press  the  ENTER  and  MENU 
buttons to exit the OSD Menu.

  

Hint: 

For Windows 2000, the pitch and phase may be calibrated after the Exit Windows screen is  

   

displayed. If the frequency needs to be calibrated, light and dark vertical stripes will appear  

   

in the dark areas of the screen. If the tracking needs to be calibrated, light and shade will  

   

appear horizontally in the dark areas of the screen (for 1024 x 768-bit resolution). 

    

This method is recommended in situations where the tablet driver has not been installed. 

1

2

Adjustment pattern for pitch and phase

 

UM-0325(B)_EN.indd   15

09.8.31   6:06:35 PM

Содержание DTI-520UB
































Отзывы: