Wacom Cintiq Pro 32, Руководство пользователя

Страница: 125 / 452

Parameter Description
Logon
Password Enter the password for the client (maximum number of characters is 128). This password will be
sent to the speci
fi ed connection server.
Logon Domain
Name Enter the domain for the client (maximum number of characters is 256). This domain will be
sent to the speci
fi ed connection server.
Desktop Name
to Select Enter the desktop name used by the client when starting a session.
This fi eld is case sensitive.
Certi fi cate
Check Mode
Select the level of veri fi cation performed on the certi fi cate presented by the connection server:
• Never connect to untrusted servers: Con fi gure the client to reject the connection if a trusted,
valid certi fi cate is not installed. (This is the most secure option.)
• Warn before connecting to untrusted servers: Con fi gure the client to display a warning if an
unsigned or expired certi fi cate is encountered, or if the certi fi cate is not self-signed and the
Tera2 PCoIP Zero Client trust store is empty. (This option is selected by default.)
• Do not verify server identity certi fi cates: Con fi gure the client to enable all connections. (This
option is not secure.)
Certi fi cate
Check Mode
Lockout
When enabled, prevents users from changing the Certi fi cate Check Mode settings from the OSD
or AWI.
Auto Connect This fi eld determines the client’s auto connect behavior after startup:
Enabled: The client automatically connects with the connection server after startup and a PCoIP
session ends, bypassing the OSD Connect page.
Disabled: The client does not automatically connect with the connection server.
Enabled With Retry On Error: The client will continuously attempt to contact the connection server.
After a connection failure, the client waits before attempting to connect again. This wait time
increases with each successive failure. The wait interval is not con
fi gurable.
Devices running fi rmware 4.1.1 or lower do not support Retry On Error behavior and will always
perform a single attempt to contact the connection server when this option is selected.
After enabling Auto Connect, the client must be power-cycled for the change to take effect.
AWI: PCoIP Connection M Auto-Logon Session Settings
© 2020 Teradici 125