11
ECO function
SHORTCUT function
SLEEP function
ECO
Press this button under COOL Mode to enter the energy efficient mode.
(For model of RG51A(2)/EF, RG51A(2)/EFU1, RG51A(2)/CEF, RG51A10(2)/EF,
RG51Y7(2)/EF)
Note:
This function is only available under COOL mode
.
SHORT CUT
SLEEP
Used to restore the current settings or resume previous settings.
(For model of RG51B(2)/EF, RG51B(2)/EFU1, RG51B(2)/CEF, RG51B10(2)/EF,
RG51B10(2)/CEF, RG51Y8(2)/EF)
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Push this button when remote controller is on, the system will automatically revert back to the
previous settings including operating mode, setting temperature, fan speed level and sleep
feature(if activated).
If pushing more than 2 seconds, the system will automatically restore the current operation
settings including operating mode, setting temperature, fan speed level and sleep feature
(if activated ).
The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
The sleep function is not available in Fan or Dry mode.Please refer to the OWNER’S MANUAL for
more details.
