Wacker Neuson PTS 4V, Руководство оператора

Страница: 37 / 60

wc_tx003331gb.fm
37
PTS 4V Maintenance
5.12 Cleaning the Pump
After pumping water containing a large amount of dirt or debris, clean out inside of
pump housing.
1. Remove drain plug (a) from pump housing and drain any water left in pump.
2. Loosen the four knobs (b) holding the pump cover and remove cover.
3. Clean out dirt and debris. Inspect impeller and volute insert for wear.
Note: Tighten cover evenly at all four corners using a wrench.
The impeller may develop sharp edges. Use care when cleaning around impeller to
prevent getting cut.
CAUTION
wc_gr010903
a
b