Wacker Neuson PS2A 800 Скачать руководство пользователя страница 9

Страница: 9 / 58

wc_si000536gb_FM10.fm

PS2 800 / PSA2 800

Safety Information

1.3

Operating and Electrical Safety

This pump has not been investigated for use in swimming pool areas.

An acceptable motor-control switch shall be provided at the time of installation
according to local codes and regulations.

Operator

qualifications

Only trained personnel are permitted to start, operate, and shut down the machine.
They also must meet the following qualifications:

■

Have received instruction on how to properly use the machine

■

Are familiar with required safety devices

The machine must not be accessed or operated by:

■

Children

■

People impaired by alcohol or drugs

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while operating this
machine:

■

Close-fitting work clothes that do not hinder movement

■

Safety glasses with side shields

■

Hearing protection

■

Safety-toed footwear

WARNING

Electric shock hazard.

►

To reduce risk of electric shock, connect only to a properly grounded,
grounding-type receptacle.

►

To reduce risk of electric shock, follow instructions in this manual for proper
installation.

CAUTION

Electric shock hazard. This pump may automatically restart.

►

Prior to working on the pump or control panel, all supply circuits must be
disconnected.

►

Do not remove cord and strain relief.

Содержание PS2A 800



























































Результаты поиска

Содержание PS2A 800

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson PS2A 800, Руководство оператора

Результаты поиска

Содержание PS2A 800

Отзывы:

Бренды по названию

Популярные бренды