Wacker Neuson MFS735-CE, Руководство оператора

Страница: 25 / 44

25
MFS735 Operation
4.9 Installation of the Cutting Blade
Procedure Perform the procedure below to install the blade.
1. Make sure that the engine is switched "OFF".
2. Turn the crank
(a) counter-clockwise until the machine tilts up at maximum
height.
3. Lift the blade-guard up from the front side.
4. Using the wrench that comes with the machine, remove the nut
(b) which
fastens the face-plate (c) .
5. Take out the face-plate
(c)
, and then place the blade
(d)
through the shaft next
to the supporting disc
(e)
.
6. Then re-install the face-plate (c) and secure by tightening the nut (b) .
7. Lower the cutting blade guard back down.
Result The cutting blade is now installed.
e
d
c
b
a