Wacker Neuson MFS735-CE, Руководство оператора, Страница: 20 / 44

20
MFS735 Operation
4.3 Application
The Floorsaw should only be operated in a forward direction. The drive engine
fastened to the frame drives the cutting blade by way of a drive belt.
The infinitely variable cutting depth of the cutting blade is adjusted with the help of
a hand crank, and 1 turn of the crank equals 5 mm (0.20 in) cutting depth
adjustment.
The Blade guard can be swung away upwards for an easier assembly of the cutting
blade.
The blade guard is moreover linked to the water tank via a hose and a coupling.
Wetting the cutting blade with water will stop dust forming during the cutting
process.
The coupling fitted to the water hose means an external water supply can be used.
The engine works according to the 4-stroke principle, is started by means of a
recoil starter, takes in the air via a dry air filter and is air cooled.
The engine speed can be infinitely varied with the help of the throttle lever; the
optimum cutting speed of the cutting blade is only achieved when the drive engine
is turning at full speed.
In order to facilitate the starting, the engine is provided with a choke.
During operation, there should always be sufficient water in the water tank
.
4.4 Before Starting the Machine
Remember
Read and understand the safety and operating instructions at the beginning of this
manual.
Check
„
Oil level in the engine
„
Fuel level
„
Condition of the air cleaner
„
Tightness of the external fasteners
„
Condition of the fuel lines