manualshive.com logo in svg

Wacker Neuson LTN6L-V, Руководство оператора

Поделиться
Скачать
Wacker Neuson LTN6L-V Скачать руководство пользователя страница 49

wc_tx003099gb.fm

49

LTN 6L-V

Maintenance

5.9

Replacing the Air Cleaner

When

Replace the air filter element when the air filter restriction indicator on the control 
panel illuminates.

Requirements

„

Machine shut down

„

Clean, dry cloths

„

Replacement filter element (as needed)

Background

The air cleaner assembly consists of an enclosure

 

containing a pleated filter 

element. The element must be replaced when it becomes dirty or clogged. The 
enclosure must also be wiped clean of dust.

 

Procedure

Follow the procedure below to maintain the air cleaner.

1. Open the metal latches and remove the cover from the enclosure.
2. Remove the filter element and discard.

3. Clean inside of the enclosure with a clean dry cloth.

4. Place a new filter element into the enclosure.

NOTICES

„

Do not re-use a damaged filter element. Replace the element even if the 
damage is very slight.

„

Do not tap or strike the filter element to clean it.

„

Do not wash the filter element.

5. Reinstall the cover, and close the latches.

Result

The air cleaner has now been maintained.

  

wc_gr000540

WARNING

Fire hazard. 

f

Never use gasoline or low flash-point solvents for cleaning the air cleaner.

Содержание LTN6L-V















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды