Wacker Neuson GV 3800A, Руководство оператора

Страница: 31 / 56

GV 3800A Operation
wc_tx001890gb.fm
31
4.13 Voltage Selector Switch
The voltage selector switch (e) switches the generator output between
the single-voltage mode (120V) and the dual-voltage (120/240V)
mode.
In single-voltage mode, the full rated power of the generator is shared
between the two 120V duplex receptacles.
In dual-voltage mode, generator power is shared between the 120/
240V twist-lock receptacle and the 120V duplex receptacles. To
achieve full power, use only the 120/240V twist-lock receptacle.
Note:
Only use the 120/240V twist-lock receptacle (j) when the VSS is in the
120V/240V position.
NOTICE : NEVER change the position of the voltage selector switch
when the main breaker is in the ON position. This can cause arcing and
can damage the generator. Turn all tools and appliances off and place
the main circuit breaker
(d) in the OFF position before changing the
position of the voltage selector switch.
4.14 Auto Idle Switch
The auto idle switch (b) automatically reduces engine speed after all
appliances or tools attached to the generator have been turned off.
The engine automatically returns to full speed when a tool or appliance
is turned back on.
To turn the auto idle feature on, push the auto idle switch to “AUTO”.
The AUTO setting is recommended while the generator is running to
minimize fuel consumption. To avoid extended engine warm-up
periods, keep switch set to “OFF” when starting the engine and until
the engine reaches operating temperature.