Wacker Neuson G 240, Руководство оператора

Страница: 84 / 254

wc_tx003229gb_FM10.fm
84
Mobile Generator
Working with Basler Controller
8.11 Changing or Disabling the Low Fuel Alarm Setting
Requirements

Machine stopped

Start switch in REMOTE START
Note: Internal programming of the genset controller, or closed connections to a
remote start switch, may cause the machine to start unexpectedly. Be prepared for
the engine to start even with the engine start switch in the REMOTE START
position.
Background The LCD panel displays, in percentage, how much fuel is in the fuel tank. The low
fuel alarm shutdown is set at the factory to activate at 6%. This value may be
changed if desired. For example, you may wish to reduce the low fuel alarm setting
so that the machine operates for a longer period of time or until virtually all fuel is
consumed before the genset controller shuts down the machine for lack of fuel.
The range allowed by the genset controller is 0–100%.
Notes

Do not set the low fuel alarm to a value greater than that of the low fuel pre-
alarm. Doing so will nullify the function of the low fuel pre-alarm.

Setting the low fuel alarm below 5, in effect, disables the low fuel alarm. The
genset controller will not shut down the machine. The machine will shut down
when all fuel is consumed.

“5” is the lowest value the LCD will display.
NOTICE: If the low fuel alarm is set below 5, it is possible to run the fuel so low that
air will be drawn into the engine. The fuel system may then need to be bled before
it will start and run.
Approximate run time (at 100% prime load) gained with low fuel alarm set to 0%.
Procedure Perform the procedure below to change the low fuel alarm setting.
1. Press the right arrow button (1) to access the MAIN MENU.
This procedure continues on the next page.
Machine Fuel Use gal/hr Time Gained hr
G 25 1.8 3.7
G 25 ERT 1.8 4.2
G 50 3.4 3.0
G 50 ERT 3.4 3.8
G 70 4.9 2.1
G 70 ERT 4.9 2.6
G 100 6.2 3.3
G 120 7.44 2.7
G 150 8.85 3.4
G 180 10.8 2.7
G 240 13.5 2.1