Safety
4.8 Specific safety instructions when operating electrical ap-
pliances
16
Operator’s manual | FUH | 5100056242 | 09/2020 | [en]
NOTICE
Observe the respective national safety guidelines!
Extension cable
• Extension cables and cable drums must be unrolled completely prior
to use.
• Only operate the machine with undamaged and tested extension
cables! Damaged or tangled cables increase the risk of electric
shock.
• Only use extension cables with grounding conductor and correct
grounding conductor connection to plug and coupling (only machines
of protection class I),
.
• Only use tested extension cables that are suitable for use on con-
struction sites:
– H05RN-F or preferably – Wacker Neuson recommends H07RN-F,
a SOOW cable or a country-specific equivalent version.
• Immediately replace damaged extension cables (e.g. cracks in the
sheath) or loose plugs and couplings.
• Cable drums and multiple plug receptacles must meet the same re-
quirements as extension cables.
• Protect extension cables, multiple plug receptacles sockets, cable
drums and connectors from rain, snow or other wet conditions.
Protect power cables
• Do not use the power cord to pull or lift the machine.
• Do not pull the plug of the power cable out of the plug receptacle by
the cable.
• Protect the power cord from heat, oil and sharp edges.
• If the power cord is damaged or the plug is loose, have the power
cord replaced immediately by a Wacker Neuson service partner.
Protect from moisture
• When working outdoors, only use cables that are suitable for outdoor
use.
• Use a residual current circuit breaker if it is not possible to avoid
working in a damp environment.
NOTICE
Notice for cleaning the machine!
►
Do not clean the machine with high pressure or steam cleaners!
