Wacker Neuson ET35 Скачать руководство пользователя страница 147

Страница: 147 / 302

BA E16 en* 1.0 * E16_10_510.fm

5-37

Operation 5

Lehnhoff mechanical quickhitch system (optional)

• The quick coupler system and the attachment support must be

undamaged and clean.

• Store the Operator’s Manual of the mechanical quick coupler system

together with the Operator’s Manual of the vehicle.

• The described operation does not apply to the face shovel. Contact an

authorized workshop for face shovel operation.

WARNING

Crushing hazard when picking up

attachments!

If an attachment is not locked correctly, it can come off and cause serious
injury or death.

► Do not allow anyone to stay in the danger zone.
► During locking and unlocking procedures, make sure that hands and

feet are not crushed.

► Only use undamaged attachments and quick coupler systems.
► Before starting any work and after every locking process, press the

attachment to the ground and quickly move it back and forth over just
over the ground a few times to check the secure locking.

► Only operate the vehicle with a safely locked attachment.

WARNING

Crushing hazard when attachments are removed!

If an attachment is not removed correctly, it can tip over and cause serious
injury or death.

► Do not allow anyone to stay in the danger zone.
► Lower the attachment to level and firm ground ensuring stability.

Acceptance variants

ET35/EZ36: acceptance of MS03

: Openings for quick coupler system bolts

Fig. 177

MS03

Содержание ET35















































































































































































































































































































Результаты поиска

Содержание ET35

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET35, Руководство оператора

Результаты поиска

Содержание ET35

Отзывы:

Бренды по названию

Популярные бренды